About the specific introduction of the rescue stretcher car II
The new quick rescue ambulance car utility model provides a new type of quick rescue ambulance car, which can be used with all docking vehicles. Only a concave track groove is arranged in the center of the guardrail frame on both sides of the docking berth bed, and the bottom of the groove is provided with a magnet and a stretcher. The two rows of magnetic wheels or pulleys do not match, that is, the magnetic wheel rolls along the concave track groove, the buoyancy occurs due to the magnet repelling with the pole, and the friction is greatly reduced by the tumbling, thereby greatly reducing the labor intensity, and the stretcher is The left and right parts are combined, that is, half is pierced from the left side of the patient, the other half is pierced from the right side of the patient, and the two ends are buckled. The stretcher is pulled along the border of the guardrail, and the body can be moved smoothly without the need to turn the body sideways. The patient has little influence on the disease condition, is convenient to operate, saves manpower, and is easy to implement in the hospital. Automatic damping buffer up and down stairs rescue stretcher car This new type touches an automatic damping buffer up and down stairs rescue stretcher car, especially the patient up and down stairs rescue stretcher car equipment.
It is provided with a bracket and a rolling shaft and a damping buffer and a damping buffer frame at the bottom of the stretcher center. The damping buffer bracket is connected with a damping buffer wheel, and the lower end of the bracket is provided with driving wheels on both sides of the crank shaft. One end of the stretcher is provided with the vehicle credential and the support frame and the auxiliary wheel, and the other end of the stretcher is provided with an unlocking handle, a connecting rod and a locker, and a stretcher cloth is arranged on the stretcher. The up and down stairs are controlled by the unlocking handle to control the rolling of the damping buffer wheel and the driving wheel, the unlocking handle controls the connecting rod and the locker, and the damping buffer wheel and the driving wheel are folded through the rolling shaft. The effect is simple structure, convenient operation, no fluctuations on the up and down stairs, and the stretcher is sensitive, saves time and effort, and rescues the patient in time. It is widely used in hospitals to climb up and down the stairs and rescue the patient equipment. A stretcher-type patient transporter that can be moved to the left and right and can be folded. A stretcher-type patient transporter that can be moved to the left and right and can be folded is attributed to the medical device technology. There is a guide rail at each end of the upper part of the car body. The bottom of the guide rail has a rack. The guide rail can be moved to the left and right by the gear. The guide rail has a guide sleeve, which can slide along the guide rail. There are two rollable stretchers on the guide sleeve. The rod can be used to roll the sheets under the patient's body into a stretcher. When not in use, the stretcher system can stand upright on one side and the legs can be retracted to reduce the floor space.